TM 5-6350-280-23&P 9 MS3420-4A 1 ADAPTER, CABLE CLAMP, BUSHING 8 MS3420-6A 1 ADAPTER, CABLE CLAMP, BUSHING 7 M23053/5-201-C AR INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE MIL-1-23053/5 6 M23053/5-106-9 AR INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE MIL-1-23053/5 5 M24308/3-1 1 CONNECTOR, ELEC, RECTANGULAR, MINIATURE MIL-C-24308/3 POLARIZED SHELL, RACK AND PANEL, 9 PIN CONTACTS, GENERAL PURPOSE, CLASS G, SOLDER TYPE 4 M24308/25-9 2 CONNECTOR, ELECTRICAL, RECTANGULAR, SCREW- MIL-C-24308/25 LOCK, MALE 3 M85049/48-2-1 1 CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN MIL-C-85049/48 RELIEF, STRAIGHT 2 13229E8198 1 CABLE, ELECTRICAL 1 13229E8210-4 1 CONNECTOR, ELECTRICAL FIND NO. PART NO. QTY DESCRIPTION SPECIFICATION NOTES: 1 DIMENSIONS  SHOWN  ARE  FOR  GENERAL  ROUTING AND MAY BE ALTERED TO FACILITATE INSTALLATION. 2. ELECTRICAL CONNECTIONS SHALL BE SOLDERED IN ACCORDANCE WITH MIL-STD-2000. 3. MARK    "91403-13229E8199"    ON    FIND    NO.        6,    IN ACCORDANCE WITH MIL-STD-130, METHOD OPTIONAL. 4. MARK   REFERENCE   DESIGNATIONS,   TWO   PLACES, 180°   APART   IN   ACCORDANCE   WITH   MIL-STD-130, METHOD OPTIONAL. 5. COVER DRAIN WIRE IN P2 END OF CABLE, FIND NO. 2,  WITH  SLEEVING,  FIND  NO.    7.    SHRINK  TO  FIRM FIT. 6. MARK   REFERENCE   DESIGNATION,   ON   SURFACE INDICATED,    IN    ACCORDANCE    WITH    MIL-STD-130, METHOD OPTIONAL. 7. TRIM SHIELD AND DRAIN WIRE FLUSH WITH OUTER JACKET AT P1. TERMINATION WIRE WIRE NO. COLOR NOTES FROM TO 1 P1-1 P2-1 RED 2 P1-2 P2-2 BLACK 3- DRAIN 5 SHIELD - P24 DRAIN 5 Figure D-2.  UPS Cable Assembly Fabrication. D-3/(D-4 blank)