TM 10-5411-206-14
Table 2-1. Operator Preventive Maintenance Checks and Services (cont).
B – Before
D – During
A – After
W – Weekly
M - Monthly
Item
No. B
11
Interval
D A W
Item to be
M
Inspected
Skids and
Mounting Brackets
Procedures
Check for and have repaired
or adjusted as necessary
Make sure skids and mounting brackets
are securely mounted to shelter and are
undamaged.
Item is
Not Ready/
Available If:
Section II. OPERATION UNDER USUAL CONDITIONS
Subject
Para
Page
Assembly and Preparation for Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
2-4
Initial Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
2-4
Operator Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
2-4
preparation for Movement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
2-4
Instruction and Warning Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
2-5
2-3. Assembly and Preparation for Use. There are no assembly or preparation procedures that must
be performed before using the basic shelter. For all assembly and preparation procedures applicable to a
configured shelter, refer to the end item technical manual.
2-4. Initial Adjustments. The shelter itself requires no adjusting. However, the operator must make certain
the shelter is positioned so that the doors can be fully opened and closed and that any external equipment
required for operation of the shelter-contained equipment can be properly installed. Refer to the end item
technical manual for additional procedures applicable to the configured shelter.
2-5. Operating Procedures. There are no operating procedures applicable to the basic shelter. Refer to
the end item technical manual for operating procedures applicable to the configured shelter.
2-6. Preparation for Movement. Before moving the shelter, make sure the doors are closed and
padlocked. If the shelter is being moved by truck, make sure the shelter is properly tied down and blocked to
prevent movement. Refer to paragraph 3-5 for instructions for securing the shelter on a truck. If the shelter must
be loaded onto a truck for movement, refer to paragraph 3-5 for lifting and loading instructions. Refer to the end
item technical manual for additional preparation instructions applicable to the configured shelter.
2-4
