TM 10-5411-206-14
(8)
(9)
(10)
(11)
Coat exposed side of shim (13) (the side that will mate with shelter floor) with sealer.
Position mounting bracket (5), together with all shims, on shelter bottom.
Install four hex head screws (7), with one lockwasher (10) and one flat washer (9) each, in end pair of
mounting holes at each end of mounting bracket (5). Install eight socket head screws (6) and 44 hex
head screws (8) in remaining mounting holes.
If required, replace shelter on ground (para 3-5).
4753-041
Figure 5-6. Skid Assembly and Mounting Bracket Replacement.
5-15/(5-16 blank)
