TM   10-5411-207-14 2-3.      Explanation   of   Columns   (cont). d. Equipment   is   Not   Ready/Available   If This  column  tells  you  when  and  why  your equipment   cannot   be   used. NOTE Perform  your  “weekly  checks”  in  addition  to  the  “before  checks”  if you  are  the  assigned  operator  and  have  not  operated  the  equipment since  the  last  weekly  check  was  performed,  or  if  you  are  operating the  equipment  for  the  first  time. Table   2-1.   Operator   Preventive   Maintenance   Checks   and   Services. NOTE Within  designated  interval,  these  checks  are  to  be  performed  in  the order  listed. Item 1 2 3 4 Interval B • • • • D    A w • • • • M Item to be Inspected Door  Handle Emergency  Exit Panel  Assembly Door  Brace Assembly Door   Assembly Procedures Check for and have repaired or  adjusted  as  necessary Make sure handle on door operates  smoothly  without binding or jamming. a. Make sure emergency exit panel assembly can be removed. b. Make sure weather is in good condition. gasket c.  Make  sure  cover  assembly can be held in the open position. Make sure door brace assem- bly moves smoothly to open position and catch holds brackets in place. Check for loose or missing hardware. a. Make sure door opens and closes smoothly without bind- ing.  Check  for  rust,  loose or missing hardware. Lubri- cate hinges. Item is Not  Ready/ Available if: Door cannot be opened or cannot be  closed  securely. a.  Emergency  exit panel  assembly cannot  be  removed. a.  Door  cannot  be opened or cannot be  closed  securely. 2-2