TM 10-5411-207-14
3-26.
Skid Assembly (cont).
(3)
(4)
(5)
(6)
(7)
(8)
Remove four blind rivets (11) attaching each of the four channel brackets (12)
and laminated shims (13) and remove brackets and shims.
NOTE
Replace the skid runner (5) only when it appears severely damaged
and does not allow the proper installation of the skid.
Remove and retain 16 cap screws (14) attaching each skid runner (5) to shelter
underside and remove runner (5) and shims (15, 16, 17, and 18).
Position shims (15, 16, 17, and 18) and each skid runner (5) in place and secure
each to underside of shelter with 16 cap screws (14).
Place each of the four channel brackets (12) and laminated shims (13) inside
skid (4), align mounting holes and secure to skid with four blind rivets (11).
Position new shock mounts (6 and 7) and core (8, 9, and 10) in place.
Position each skid assembly (4) inside the skid runner (5) and secure using six
hex head bolts (1), twelve flat washers (2), and six nuts (3).
—
c.
Repair. Repair of skid assembly consists of repair or replacement of a damaged skid
or skid runner and replacement of damaged shock mounts and core material.
3-58
