TM 55-4920-432-13&P
SECTION II - SERVICE UPON RECEIPT
3-6
GENERAL
3-6
Visually check the exterior of the Pitot and Static Systems tester for any apparent damage. Check contents to
assure that all components listed in the Repair Parts and Special Tools List (RPSTL) of this manual are
enclosed and undamaged.
SECTION III - PREVENTIVE MAINTENNCE CHECKS AND SERVICES (PMCS)
3-7
GENERAL
3-7
Preventive maintenance for the Pitot and Static Systems Tester is covered by the following paragraphs as well
as the Notes and Cautions in Chapter 2, and information listed in Table 2-1. These Notes and Cautions, if
followed, assure that the equipment will be used in the proper manner.
3-8
CLEANING
3-8
CAUTION
Use a soft cloth dampened with a solution of mild soap and water or isopropyl alcohol for cleaning.
a.
Keep equipment free of dirt and grease. Place protective cover over tester operator panel and
external ports when not in use.
b.
Clean load cells prior to use to assure good mating surfaces for the adapters.
3-2
