TM 10-5411-206-14
3-16. Air Inlet Filters.
This task covers:
a. Service
b. Replace
INITIAL SETUP
Tools
General Mechanic’s Automotive Tool Kit
SC 5180-90-CL-N26
Blind Riveter
Materials/Parts
Sealer (Item 29 or 30, Appendix D)
Rivnuts, various
Lubricant (Item 17, Appendix D)
Materials/Parts (cont)
Gloves (Item 12, Appendix D)
Goggles (Item 38, Appendix D)
General Safety Instructions
WARNING
Drilling creates metal chips which may enter eyes
and cause serious injury. Eye protection is
required.
a. Service. Servicing of the recessed step pan assembly consists of lubricating moving parts. Refer to
paragraph 3-1 for lubrication instructions.
b. Replace (figure 3-15)
(1)
(2)
(3)
(4)
Drill out four rivets (1) and take divider strip (2) off frame (3). (Refer to paragraph 3-9a. for rivet removal
instructions.)
Pull air filters (4) out of frame (3).
Insert air filters (4) into frame (3).
Position divider strip (2) across back against inside of frame flange, and fasten with four rivets(1).
(Refer to paragraph 3-9a. for rivet installation instructions.)
Figure 3-15. Air Inlet Filter Replacement.
3-30
