TM 10-5411-206-14
3-17. Recessed Step Pan Assembly.
This task covers:
a. Service
b. Replace
INITIAL SETUP
Tools
General Mechanic’s Automotive Tool Kit
SC 5180-90-CL-N26
Blind Riveter
Materials/Parts
Sealer (Item 29 or 30, Appendix D)
Rivnuts, various
Lubricant (Item 17, Appendix D)
Materials/Parts (cont)
Gloves (Item 12, Appendix D)
Goggles (Item 38, Appendix D)
General Safety Instructions
WARNING
Drilling creates metal chips which may enter eyes
and cause serious injury. Eye protection is
required.
NOTE
The shelter has three recessed step pan assemblies. This procedure is typical for all
three.
a. Service. Servicing of the recessed step pan assembly consists of lubricating moving parts. Refer to
paragraph 3-1 for lubrication instructions.
b. Replace. (figure 3-16)
(1) Drill out ten rivets (1) and remove recessed step pan assembly (2) from shelter wall. (Refer to
paragraph 3-9a for rivet removal instructions.)
(2) Position recessed step pan assembly (2) in inset in shelter wall so that step is pointing up when
retracted, and fasten with ten rivets (1). (Refer to paragraph 3-9a. for rivet installation instructions.)
Figure 3-16. Recessed Step Pan Assembly Replacement.
3-31
