TM 10-5411-206-14
5-6. Door Assembly.
This task covers:
Replace
INITIAL SETUP
Tools
Personnel Required
General Mechanic’s Automotive Tool Kit
Two
SC 5180 -90-CL-N26
Electronic Equipment Shelter Tool Kit TK-144/G
Equipment Condition
Materials/Parts
Door brace assembly removed (para 3-11).
Sealer (Item 29 or 30, Appendix D)
Replace. (fgure 5-1)
(1)
(2)
(3)
(4)
(5)
(6)
NOTE
One person should support door assembly while second person removes and installs
hardware.
Remove two bolts (1), two self-locking nuts (2) and two flat washers (3) securing each hinge (4) to
shelter wall.
Push door assembly (5) out of shelter. Remove hinge shims (6).
Position shim(s) (6) against underside of each door hinge (4) and insert two bolts (1) through each hinge
and shim(s).
Position door assembly (5) in shelter cutout and insert bolts (1) through mounting holes in shelter wall.
Install one flat washer (3) and one self-locking nut (2) on each bolt (1).
Check latch torque. Latch torque should be 15 foot-pounds (30 foot-pounds with RFI/EMI gasket). Add
or subtract hinge shims (6) to achieve proper torque.
5-2
