TM 10-5411-207-14
3-18.
Door Assembly (cont).
d.
Remove. (Figure 3-19)
(1) Remove and retain ten phillips head screws (1) attaching the door stop bracket
(2) to inside of the door, and a phillips head screw (3) attaching the chain end.
(2) Remove and retain the two 5/16-24 x 2-27/32 bolts (4), one 5/16-24 x 2-23/32
bolt (5), three flat washers (6), and three self-locking nuts (7) attaching each of
the four hinges (8) to door.
WARNING
To prevent damage to door or injury to personnel, use extreme care in
lifting and carrying door.
(3) Turn door handle to open position and remove door. For disassembly instructions
to remove the door latch assembly, refer to paragraph 3-20.
Figure 3-19. Door Assembly Replacement
3-34
