TM 10-5411-207-14
3-17.
Hinge Assembly.
This task covers:
a.
Inspect
d.
Assemble
b.
Remove
e.
Install
c.
Disassemble
INITIAL SETUP
Tools
Materials/Parts
General Mechanic’s Automotive Tool Kit
Sealer (Item 28, Appendix D)
a.
b.
c.
d.
e.
Inspect. (Figure 3-16)
(1) Inspect hinge for ease of movement.
(2) Inspect for cracks or dents.
(3) Inspector secure mounting.
Remove. (Figure 3-16)
(1) Remove and retain two bolts (1) and a bolt (2), three flat washers (3), and three
nuts (4) attaching the hinge body (13) to door panel.
(2) Remove and retain two bolts (5), flat washers (6), and nuts (7) attaching the
hinge butt plate (12) to shelter, and remove hinge and shims (8 and 9).
Disassemble.
(1) Remove spring pin (10) attaching hinge pin (11), and push hinge pin (11) out of
hinge butt plate (12).
(2) Remove hinge body (13) and two hinge washers (14) from hinge butt plate (12).
Assemble.
(1) Position hinge washers (14) and hinge body (13) in place on hinge butt plate (12).
and secure by inserting hinge pin (11) into hinge butt plate (12).
(2) Attach spring pin (10) to hinge body (13) to secure hinge pin (11).
Install.
NOTE
Coat shafts and underside of bolt heads with sealer before installing
bolts (1, 2 and 5).
(1) Position shims (8 and 9) and hinge butt plate in place on shelter wall and secure
to shelter with two bolts (5), flat washers (6) and nuts (7).
Change 1 3-29
