TM 5-6350-280-10
1.7 NOMENCLATURE. CROSS REFERENCE LIST.
Refer to table 1-1.
Table 1-1. Nomenclature Cross Reference List.
Common Name
Official Nomenclature
Computer
Consists of:
IBM-PC/AT compatible computer
Keyboard
Color Monitor
Dot Matrix Printer
Application
AMG PC Software Diskette Number 1 and AMG PC Software
software, AMG
Diskette Number 2
operating system,
or AMG program
1.8 LIST OF ABBREVIATIONS.
Refer to the glossary located at the back of this manual.
1.9 GLOSSARY.
Refer to the glossary located at the back of this manual.
SECTION II. EQUIPMENT DESCRIPTION AND DATA
1.10 EQUIPMENT CHARACTERISTICS, CAPABILITIES, AND FEATURES.
The AMG Group with its computer is composed of two major groups.
1.10.1 AMG Equipment Characteristics, Capabilities and Features. The AMG equipment consists of a Converter
Multiplexer Assembly (CMA), Uninterruptible Power Supply (UPS), Communications Circuit Card Assembly (CCA) and
AMG application software consisting of two 5-1/4 inch disks. The Communications CCA is installed in the computer.
The AMG is designed to receive signals from up to 64 remote areas and provides software support. In addition, the UPS
provides uninterruptible power to the CMA and computer.
1.10.2 IBM-PC/AT Compatible Computer. The IBM-PC/AT compatible computer consists of a personal computer,
color monitor, and dot matrix printer. These items are furnished by the user. The personal computer must have a hard
drive, 5 1/4 inch floppy disk drive as drive A, and parallel printer port. Refer to the manuals provided with the personal
computer, color monitor, and dot matrix printer for additional information. In addition, this computer must operate with
MS-DOS® version 3.2 or higher.
1.10.3 J-SIIDS Capabilities and Features. The AMG, when used with an IBM-PC/AT compatible computer, is
designed to operate with the J-SIIDs. Refer to TM 5-6350-264-14-1 for characteristics, capabilities and features of the J-
SIIDS.
1.11 LOCATION OF MAJOR COMPONENTS.
The AMG has four major components which are the UPS, CMA, Communications CCA, and the AMG application
software on two 5 1/4 inch disks. Refer to Chapter 2 paragraph 2.1 for the operator controls and indicators for the AMG.
1-2
