TM 5-6350-280-23&P
(2)
Type "a: install".
(3)
When message appears on screen, remove disk labeled "AMG PC Software Diskette 1" from floppy drive
and store in protective sleeve.
(4)
Remove disk labeled "AMG PC Software Diskette 2" from protective sleeve and insert into 5 1/4 inch floppy
drive.
(5)
Press any key.
(6)
When message appears on screen, remove disk labeled "AMG PC Software Diskette 2" from floppy drive
and store in protective sleeve.
(7)
Restart the computer by pressing <Ctrl>, <Alt>, and <Delete> keys simultaneously.
NOTE
The following installation procedure must be made with the assistance of
designated operator level supervisory personnel.
(8)
Identify data input twisted pairs from J-SIIDS to be installed to modules in CMA (table 2-1). Connections of
twisted pairs are made to Surge Suppressor CCA located on rear door of CMA.
Table 2-1. AMG Modules.
Module Number
Areas Monitored
Drawer Assembly
Backplanes From Front View
1
1-8
Upper
Left
2
9-16
Upper
Left
3
17-24
Upper
Right
4
25-32
Upper
Right
5
33-40
Lower
Left
6
41-48
Lower
Left
7
49-56
Lower
Right
8
57-64
Lower
Right
(9)
Refer to TM 5-6350-280-10 and configure AMG operating system software.
2.7 STORAGE.
a.
Placement of equipment in administrative storage should be for short periods of time when a shortage of
maintenance effort exists. Items should be in mission readiness within 24 hours or within the time factors as
determined by the directing authority. During the storage period appropriate maintenance records will be kept.
b.
Before placing equipment in administrative storage, current preventive maintenance checks and services should
be completed, shortcomings and deficiencies should be corrected, and all modification work orders (MWO's)
should be applied.
2-4
