TM55-4920-432-13&P
4-24 TOGGLE SWITCH
4-24
THIS TASK COVERS: REMOVAL AND INSTALLATION
Initial Set-Up:
Personnel Required:
68F Aircraft Electrician
or
35H TMDE Support Specialist
Tools and Equipment:
Tool kit (B2) or Shop Set (B4)
Material/Parts:
Toggle Switch, Heat Shrink (D5), Solder (D8)
Equipment Condition:
Power disconnected, control panel open
1.
REMOVAL:
a.
Remove wire from switch leads.
b.
Remove mounting nut (1), washers (2) from top of operator
panel (3).
c.
Remove switch (4) from the bottom of the operator panel (3).
2.
INSTALLATION:
a.
Mount switch (4) into operator panel (3) from the bottom up with mounting nut (1), washers (2).
b.
Secure switch (4) to operator panel (3) by installing mounting washers (2) and nut (1) from top of
panel.
c.
Solder two wires to switch using solder (DS) and cover connections with heat shrink (D5).
Performance check (para. 2-5)
GO TO NEXT PAGE
4-26
