TM55-4920-432-13&P
4-25 FUSE HOLDER
4-25
THIS TASK COVERS: REMOVAL AND INSTALLATION
Initial Set-Up:
Personnel Required:
68F Aircraft Electrician
or
35H TMDE Support Specialist
Tools and Equipment:
Tool kit (B2) or Shop Set (B4)
Material/Parts:
Fuse holder, Heat Shrink (D5), Solder (D8)
Equipment Condition:
Power disconnected, control panel open
1.
REMOVAL:
a.
Remove wire from fuse holder leads.
b.
Remove mounting nut (1) from fuse holder (2) on bottom side of operator panel (3).
c.
Remove fuse holder (2) from the top of operator panel (3).
2.
INSTALLATION:
a.
Mount fuse holder (2) from the top of operator panel.
b.
Secure fuse holder (2) to operator panel (3) by installing mounting nut (1).
c.
Solder two wires to fuse holder using solder (Ds), and cover connections with heat shrink (D5).
Performance check (para. 2-5)
GO TO NEXT PAGE
4-28
