TM 10-5411-206-14
3-11. Door Brace Assembly (cont).
d. Assemble. (figure 3-10)
(1)
(2)
(3)
Position upper brace (1) on lower brace (2) so that screw holes line up, and install shoulder screw (3),
flat washer (4) and self-locking nut (5).
Position catch (6) on lower brace (2) and install roll pin (7).
Position tongue of lower brace (2) on bracket (8). Insert pin of chain and pin assembly (9) down through
bracket and brace. Secure with cotter pin (10).
e. Install. (figure 3-10)
(1)
(2)
(3)
NOTE
If bracket (8) was not removed from door during removal, omit step (1).
Position bracket (8) on door and fasten with ten screws (11)
Mount chain end of chain and pin assembly (9) to door with wood screw (12).
Position free end of upper brace (1) against bottom of door stop angle (13) and install shoulder screw
(14), flat washer (15) and self-locking nut (16).
Figure 3-10. Door Brace Assembly Reassembly and Installation.
3-20
