TM 10-5411-206-14
3-13. Emergency Exit Panel Assembly.
This task covers:
a. Service
b. Repair
c. Replace
INITIAL SETUP
Tools
Materials/Parts
General Mechanic’s Automotive Tool Kit
Lubricant (Item 17, Appendix D)
SC 5180-90-CL-N26
a. Service. Servicing of the emergency exit panel assembly consists of lubricating moving parts. Refer to
paragraph 3-1 for lubrication instructions.
b. Repair. Repair of the emergency exit panel at unit level is limited to temporary repair of punctures in the
aluminum. Refer to paragraph 3-9.c for repair procedures.
c. Replace. (figure 3-11)
(1)
(2)
(3)
(4)
(5)
Make sure emergency exit cover (1) is secured with latches (2) before removing emergency exit panel
assembly (3) from door.
Remove four knobs (4) by turning each one Counterclockwise.
Pull emergency exit panel assembly (3) forward and out of door.
Position emergency exit panel assembly (3) in cutout in door.
install one knob (4) through each retainer (5) and into corner of emergency exit panel assembly (3) and
tighten.
Figure 3-11. Emergency Exit Panel Assembly Replacement.
3-22
