TM 10-5411-207-14
3-16.
Plates.
This task covers:
a.
Inspect
b.
Repair
INITIAL SETUP
Tools
Materials/Parts
General Mechanic’s Automotive Tool Kit
Blind Rivets, Various
Blind Riveter
Rivnuts, Various
Rivnut Installation Tool
Sealer (Item 28, Appendix D)
a.
Inspect. (Figure 3-15)
(1) Inspect shelter for missing data plates.
(2) Inspect data plates for legibility.
(3) Check for missing rivets.
b.
Repair. Repair of the data plates consists of replacement of the missing, damaged, or
defective part, as necessary, according to the following procedure:
(1)
(2)
(3)
(4)
Remove four rivnuts (1) attaching the aircraft loading data plate (2) at the top of
the door (Refer to paragraph 3-9.b. for rivnut removal instructions).
Place the aircraft loading data plate (2) in place and secure to door with four
rivnuts (1) (Refer to paragraph 3–9.b. for rivnut installation instructions).
NOTE
The following procedures are similar for all other data plates in this
shelter.
Remove four blind rivets (3) securing data plate (4) to shelter surface and
remove plate. (Refer to paragraph 3–9.a. for rivet removal instructions.)
Place data plate (4) in place on door and secure with four blind rivets (3). (Refer
to paragraph 3-9.a. for rivet installation instructions.)
Change 1 3-27
