TM 10-5411-207-14
3-22.
Door Brace Assembly (cont).
Figure 3-25. Door Brace Assembly Removal.
d.
Assemble. (Figure 3-26)
(1)
(2)
(3)
(4)
(5)
Position the end of brace assembly (11) under door stop angle (12), align
mounting holes and secure with a screw (9), flat washer (8), castle nut (7), and
cotter pin (6).
Place lower brace assembly (10) under brace assembly (11), align mounting holes
and secure with screw (9), flat washer (8), castle nut (7), and cotter pin (6).
Using the spring pin (4) attach the door stop catch (5) to lower brace assembly
(10).
Place the free end of the lower brace (10) inside the door stop bracket (3) and
secure with pin and chain assembly (2).
Secure pin and chain assembly (2) with cotter pin (1).
e.
Install.
(Figure 3-25)
(1) Position shim (8) and doorstop angle (7) inplace on shelter wall and secure
with six hex head screws (6).
(2) Place door brace bracket (3) on door, and secure to door panel with ten phillips
head screws (1).
(3) Secure chain end of pin and chain assembly (5) to door panel with screw (4).
3-50
