TM 10-5411-207-14
3-22.
Door Brace Assembly.
This task covers: a.
Inspect
b. Remove
c. Disassemble
d. Assemble
e.
Install
INITIAL SETUP
Tools
Materials/Parts
General Mechanic’s Automotive Tool Kit
Sealer (Item 28, Appendix D)
Solid Film Lubricant (Item 22, Appendix D)
a.
Inspect. (Figure 3-26)
(1) Inspect for missing or damaged hardware,
(2) Inspect for wear, dents, or other damage.
(3) Inspect that the two hex-head screws (9)
(4) Inspect for damaged door brace catch (5)
b.
Remove. (Figure 3-25)
(1) Remove and retain
bracket (3) to door
(2) Remove and retain
panel.
(3) Remove and retain
shim (8) to shelter
the ten phillips head
panel.
move freely.
and spring pin (4).
c.
Disassemble. (Figure 3-26)
(1)
(2)
(3)
(4)
screws (1) attaching the door brace (2)
screw (4) attaching the pin and chain assembly (5) to door
six hex head screws (6) attaching door stop angle (7) and
wall and remove door brace assembly (2) and shim (8).
Remove the cotter pin (1) and release the chain and pin assembly (2) and door
stop bracket (3).
Punch out spring pin (4) and release the door
Remove cotter pin (6) attaching castle nut (7)
washer (8), and screw (9) to remove the lower
brace assembly
Remove cotter
brace assembly
brace catch (5).
and remove castle nut (7), flat
brace assembly (10) from the
(11).
pin (6), screw (9), flat washer (8), and castle nut (7) attaching the
(11) to door stop angle (12).
3-49
