TM 5-6350-280-23&P
4.6.14.1 Removal (continued).
CAUTION
Do not remove Communications CCA without a wrist ground strap and being
grounded. The Communications CCA is ESD sensitive and damage to the CCA
could result. Failure to obey this caution could result in equipment damage.
b.
Remove RS-485 cable assembly (1) from upper jack of communications CCA.
c.
Refer to commercial manuals and remove retaining hardware from IBM-PC/AT compatible computer cover.
d.
Remove cover.
e.
Remove retaining screw that secures Communications CCA (CCA).
f.
Remove Communications CCA (2) from expansion slot.
4.6.14.2 Installation.
a.
Connect a wrist ground strap between your wrist and ground.
b.
Insert Communications CCA (2) into expansion slot until it is seated.
c.
Install retaining screw to secure Communications CCA (2) in slot.
d.
Refer to commercial manual to install cover and retaining hardware on computer cover.
e.
Install RS-485 cable assemble (1) to upper jack of communications CCA (2). Refer to TM 5-6350-280-10 and
power equipment.
4.6.15 RS-485 Cable Assembly Maintenance.
This task covers:
a. Removal
b. Installation
b. Repair
INITIAL SETUP
Tools
Material/Parts
Electronic System Maintenance Tool Kit
RS-485 Cable Assembly (Appendix C,
(Appendix B, Section III, item 1)
figure 1, item 6)
Equipment Conditions
General Safety Instructions
Equipment shutdown (TM 5-6350-280-10)
Do not work on equipment without
following standard shop safety
precautions.
4-49
