TM 55-4920-432-13&P
SECTION II - SERVICE UPON RECEIPT
4-5
GENERAL
4-5
a.
Visually check the exterior of the Pitot and Static Systems Tester for apparent damage. Check
contents to assure that all components listed in APPENDIX C (RPSTL) of this manual are enclosed
and undamaged.
b.
If the equipment has been damaged, report the damage on SF 368, (Report of Discrepancies).
Check the equipment against the packing slip to see if the shipment is complete. Report any
discrepancies in accordance with the instructions of DA PAM 738- 751.
SECTION III - PREVENTIVE MAINANCE CHECIS AND SERVICE (PMCS)
4-6
GENERAL
4-6
Inspect Pitot and Static Systems Tester for missing or damaged components. Check for physical damage such
as breaks, cracks, wear, etc.
4-7
CLEANING
4-7
WARNING
Isopropyl alcohol is flammable and toxic. Use with adequate ventilation, gloves and eye protection. Do not use
around heat, open flames or sparks.
CAUTION
Use a soft cloth dampened with isopropyl alcohol for cleaning. Keep equipment free of dirt and grease. Place
protective cover over the tester when not in use.
4-2
