TM 5-6350-280-10
(5)
Remove power from computer.
(6)
Observe that power indicator for computer is not illuminated.
(7)
Remove paper from printer as required.
b.
At the UPS, refer to figure 2-1 and perform the following:
NOTE
When the UPS AC LINE INPUT breaker is set to off, an audible alarm will sound.
(1)
Set the UPS AC LINE INPUT breaker to OFF.
(2)
Set UPS INVERTER OUTPUT BREAKER TO OFF.
(3)
Set UPS BATTERY BREAKER to OFF.
(4)
Observe UPS AC LINE INPUT and INV OUTPUT indicators are not illuminated.
Figure 2-4. Initialization Screen (Typical).
2.5 SOFTWARE OPERATING PROCEDURES AND INFORMATION.
The AMG is a software driven monitoring system requiring an IBM-PC/AT compatible computer. The application
software provides two modes of operation which are the Secure Mode and Setup Mode.
2.5.1 Secure Mode. The Secure Mode is the mode of operation. It provides four screens that are used to display
information. Each screen displays a summary of
2-11
