TM 5-6350-280-10
2.2 GENERAL. (continued)
The “PROCEDURE” column of table 2-3 tells you how to do required checks and services. Carefully follow these
instructions. If you do not have tools, or if the procedure tells you to, notify your supervisor.
NOTE
Terms "ready/available" and Omission capable" refer to the same status: Equipment is on hand and
ready to perform its combat missions. (See DA Pam 738-750).
The “EQUIPMENT IS NOT READY/AVAILABLE IF:" column in table 2-3 tells you when your equipment is nonmission
capable and why the equipment cannot be used.
If anything looks wrong and you can't fix it, write it on your DA Form 2404. IMMEDIATELY report it to your supervisor.
Table 2-3. Operator Preventive Maintenance Checks and Services
for the AMG .
Location
Equipment Is
Item
Item to
Not Ready/
No.
Interval
Check/Service
Procedure
Available If:
UPS
1
Before
Controls and
Check that controls and
UPS indicates
indicators
indicators are not damaged.
no power
available.
Check positive operation of
switch.
2
Before
Cabinet
Check cabinet for dents, damage
or missing hardware (such as
screws and other such items).
Convertor
Multiplexer
Assembly
3
Before
Cabinet
Check cabinet for dents, damage
or missing hardware (such as
screws and other such items).
4
Before
Drawer Assembly
Check for loose handles and
dents.
Computer
5
Before
Cable Assembly,
Check for loose or damaged
RS-485
connectors at computer.
Check for cable damage.
UPS
6
Before
Cable Assembly,
Check for loose or damaged
UPS
connectors at UPS.
Check for cable damage.
Change 1 2-6
