TM 10-5411-206-14
4-13. Drip Cap.
This task covers:
Replace
INITIAL SETUP
Tools
Materials/Parts (cont)
General Mechanic’s Automotive Tool Kit
Rubber, Synthetic (Item 38, Appendix D)
SC 5180 -90-CL-N26
Goggles (Item 38, Appendix D)
Electronic Equipment Shelter Tool Kit TK-144/G
Blind Riveter
General Safety Instructions
Materials/Parts
WARNING
Sealer (Item 29 or 30, Appendix D)
Drilling creates metal chips which may enter eyes
Rivnuts, various
and cause serious injury. Eye protection is
required.
Replace (figure 4-5)
(1)
(2)
(3)
(4)
Drill out 17 rivets (1) and take drip cap strip (2) and drip cap (3) off door. (Refer to paragraph 3-9.a. for
rivet removal instructions.)
Cut a new drip cap (3) out of rubber, using old drip cap as a template.
Using drip cap strip (2) as a template, punch 17 holes in edge of replacement drip cap (3).
Position drip cap (3) and strip (2) on shelter door and fasten with 17 rivets (1). (Refer to paragraph
Figure 4-5. Drip Cap Replacement.
4-11
3-9.a. for rivet installation instructions.)
