TM 10-5411-206-14
4-9. Door Stop Angle.
This task covers:
Replace
INITIAL SETUP
Tools
Materials/Parts
Electronic Equipment Shelter Tool Kit
Sealer (Item 29 or 30, Appendix D)
TK-144/G
General Mechanic’s Automotive Tool Kit
SC 5180-90-CL-N26
Blind Riveter
Replace. (figure 4-3)
(1)
(2)
(3)
(4)
(5)
(6)
Remove shoulder screw (1), self-locking nut (2) and flat washer (3) and swing door brace (4) away from
door stop angle (5).
Remove six bolts (6) and take door stop angle (5) off shelter wall.
Inspect rivnuts (7) and replace if necessary (para 3-9. b).
Position door stop angle (5) on shelter wall so that mounting holes line up with rivnuts (7) over door.
Install six bolts (6).
Position door brace (4) against underside of door stop angle (5) and fasten with shoulder screw (1), flat
washer (3) and self-locking nut (2).
Figure 4-3. Door Stop Angle Replacement.
4-6
