TM 10-5411-206-14
4-8. Data Plates.
This task covers:
Replace
INITIAL SETUP
Toots
Electronic Equipment Shelter Tool Kit
TK-144/G
General Mechanic’s Automotive Tool Kit
SC 5180-90-CL-N26
Blind Riveter
Materials/Parts
Sealer (Item 29 or 30, Appendix D)
Rivets, Various
Goggles (Item 38, Appendix D)
General Safety Instructions
WARNING
Drilling creates metal chips which may enter eyes
and cause serious injury. Eye protection is required.
Replace. (figure 4-2)
(1) Drill out four rivets (1) and remove plate (2, 3,4, 5 or 6) from shelter wall. (Refer to paragraph 3-9.a for
rivet removal instructions.)
(2) Position data plate (2, 3,4,5 or 6) on shelter wall and fasten with four rivets (1). (Refer to paragraph
3-9.a for rivet installation instructions.)
Figure 4-2. Data Plate Replacement.
4-5
